Forum Topic

A PQCS will print. If the PQCS prints successfully, your machine is working properly. The issue has been resolved. If the PQCS doesn't print because 'Unable to Init. 4F' reappears and you have not cycled the power, go back to step 11. If the PQCS doesn't print because 'Unable to Init. 4F' reappears and you have cycled the power, continue.

Unable To Print 4f Brother Dcp-j125

Brother Dcp J105 Printer Drivers

1. Chris is the director of Refresh eCommerce and founded the company in 1999. He has worked with computers and printers all of his working life and has in-depth technical knowledge on a variety of subjects.
2. View and Download Brother DCP-J125 user manual online. Brother DCP-J125: User Guide. DCP-J125 all in one printer pdf manual download. Also for: Mfc-j265w, Mfc-j410w, Mfc-j220, Mfc-j270w, Mfc-j415w, Mfc-j615w, Mfc-j630w.
3. Print Quality Problem: Solutions for problems related to print quality: Direct Print Problem: Solutions for problems related to printing directly from a memory card or USB flash memory drive: General Print Problem: Solutions for difficulties in printing such as low print speed, print noise, and unexpected print results: Print from Computer.

Brother Dcp-j125 ขึ้น Unable To Print 4f

• Hi Techs..
  Hopeless na ba to? I've checked if there are loose objects inside pero wala talaga ako makita.. kahit pieces of paper na nakasingit wala.
  I searched for fixes online pero lahat ng nakikita ko para sa purge counter lang..
  Help please??
  Unit: BROTHER J220
  Error: Init.48 / Print.48
  Thanks!
  Edmund
• up din to..same problem as mine
• brother mfc & dcp error code and solutions
  By Alfred Valencia on Saturday, September 7, 2013 at 3:41pm
  These are list of brother printer error codes, cause and possible solutions for Brother Inkjet Printer DCP and MFC Series. These error codes mean machine problems. In many cases, the machine will require service.
  Please refer to the following table to check the error code displayed on the LCD.
  Error Code
  Cause
  Solution
  30,31,32,33,34,35,36 37,38,39,3C,3F
  The machine does not work due to a paper jam.
  Clear the paper jam
  40,42,43,44
  The internal temperature is too high.
  Unplug the machine from the AC outlet and if possible cool the room where the machine is located.
  46
  The ink absorber pad is full and needs replacing.
  Replace Waste Ink Absorber pad then perform this procedure forDCP Model or MFC Model
  48
  There is a problem on the print head,
  Please contact Brother Customer Service.
  49
  The internal temperature is too low.
  Unplug the machine from the AC outlet and if possible warm the room where the machine is located.
  4F
  There is a problem on the print head.
  Please contact Brother Customer Service
  50,51,52,57,5A,5B,5C,5D 5E,6C,6F,70,71,72,73,7A 7D
  The machine does not work due to a paper jam or some sensor problem.
  Clear the paper jam. If the problem still continues after clearing the paper jam, try to clean the encoder strip behind theprinter head
  8F
  There is a problem on the paper feed motor.
  Replace paper feed motor
  A5,A6,A7,A8,AF
  There is a problem on the scanner.
  Please contact Brother Customer Service
  E2,E3
  There is a problem on the main PCB.
  Replace PCB Mainboard
  This Reset Procedure is for Brother MFC Series Printer
  Problem: Brother MFC Printer display 'unable to clean' or Error 46 Solution:
  First turn of the printer
  Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
  Press 80
  Press the “mono start” button several times until you see “purge: xxxx”
  Press “2783” in order to reset the purge counter. You will see: “purge:0000”
  Press the 'stop' button.
  Press “99” to exit the maintenance mode.
• Pwede pa ba ma-repair MFC-J200 printer head? Looking for any one who can repair